PANEL SIZING
Weight dictates door dimensions, however for panels over 10 ft. (3000mm) wide, use three carriers for additional lateral support. If using three, adjust the middle carrier high to avoid it bearing any load.
SECURITY
For secure installations, ensure that top and bottom clearances are not sufficient to allow the door to be lifted off the track.
MATERIALS
A6 Track is tailor made with 50 x 6 flat mild steel bar with side fixing holes at approximately 600mm centres, depending on overall length of track. As standard, Safety Stops are welded to both ends of the track. Tracks are made in one piece up to 158” (4m). For over 158” (4m), track is in two or more pieces and is made with a bolted splice / joining bar in the centre of the overall track length.
3 STANDARD LENGTHS AVAILABLE
Finished: Satin Chrome with welded stops, spacers & predrilled.
KT6T2SC – 179" (2m)
KT6T3SC – 118" (3m)
KT6T4SC – 158" (4m)
L = track lenth including safety stops
HC - fixing hole
Full Scale Except As Noted
Copyright 2008 Kristrack Mfg.
KRISTRACK MANUFACTURING LTD. (A Division of A.K. Draft Seal Ltd.)
Track and Hardware Specialists |
